Clock Repair Ltd




Precision Horological Instrument Makers & Horologists



 Call Us Now On  0800 211 8925 




How to date an antique clock


Dial and Hand features

Minute hands

longcase clock hand

Introduced to longcase clocks c. 1663

Matching minute and hour hands

pair longcase clock hands

Were introduced c. 1775; however, clocks were still produced with only hours hands up until around 1820.

Seconds hands

longcase clock seconds hand

Commonly added to longcase clock dials in around 1780

Dots in the minute rings

longcase clock brass dial

In brass dials were added c. 1785.

Phases of the moon

moon phase

Shown on clock dials were introduced in c. 1745.

Paper clock dials

papper clock dial

Introduced c. 1792 for use in applying to a wooden or metal backing.

Painted dials

square painted dial

General use on clock faces around 1800.

Signatures on a clock's dial or movement

 signed clock dial

Sometimes help to date a clock if you can find the maker's name and date of activity listed in one of the many guides to watch and clockmakers. However, a signature may refer to someone other than the clockmaker. 19th century retailers and distributors often put their own names on clocks as an attempt to 'brand' their product. The actual movement may have been made by someone else. Until the 19th century clock cases were almost always made separately from the movement and are rarely signed.

Case and movement features

Gold electroplating

mantle clock

Was introduced in 1836 and became popular within a few years. It provided a safe alternative to the hazardous use of mercury in gilding metals, which was banned c. 1799.

Calendar movements

longcase clock

Were introduced to English longcase clocks c.1660.

Machine made wood screws

clock screw

Were introduced as early as 1806 in France.

Reverse painted glass pannels

braket clock

Date from the early 1800's.

Wooden movements

wooden movement

Were generally used in early American shelf clocks until around 1820, since up until then hand cast and finished brass movements were very expensive. Chauncy Jerome began manufacturing cheap 30-hour brass movements in the 1830's; by the early 1840's brass movements virtually replaced wooden ones.

Coiled wire gongs

clock gong

Used in English bracket clocks beginning around 1840.

Chime bars, also called chime rods, were introduced to clocks c. 1890. They are metal rods specially tuned to produce a sequence of chime notes when struck by the movement's hammers.


mantle clock

"Adamantine" celluloid veneer was patented in 1880. In 1882 Seth thomas introduced clock models in Adamantine veneer finishes which mimiced marble, slate, wood grains and other materials.


bakelight clock




Was invented by a Belgian born scientist Dr. Leo Baekeland, who founded the Bakelite Corporation around 1910. It reached its height of popularity in the 1930's and 40's and was used in a wide variety of consumer products.

Country of origin


Was a legal required after 1896 on clocks imported to the United States; e.g. "Made in England" or England", etc.


Clock &Watchmaker Research Service

clock maker history

We provide information on clock and watch makers, the information we can provide is not guaranteed to be all there is to know about the maker, but it is a summary of all the information found in research, that is updated regularly.

The charge for this service is £5.99. If you wish to order a clock or watchmaker research report please click the "Buy Now" button below. You will then be asked to proceed and submit your makers name and payment.


This Service Is Curentley Unavailable
clock repairs manchester 

Once your payment has been made an email with your report will be sent to your email address within 48 hrs.